Fabric and Paint

I chose to use the Poly Fiber System for NC12350.  There were two main reasons for this: 

1.  I have along time (50 years now) friend, Bob Andrews, who has probably covered close to 20 aircraft over the years always using the Poly Fiber System. Bob, a retired dentist, had his own business, covering surfaces for people in southern CA. He is also an A&P. He was always available to answer my questions and has incredible experience with the Poly Fiber range of products. 


2.  I knew that when it came to covering and painting the wing, it would have to be done in my port-a-port hangar. The conditions are less than ideal, if not down right poor. My hangar shares a single 10 amp breaker with 10 other hangars, leaks when it rains, is dusty, and has poor lighting. Specifically Poly-Tone is easy to spray and dries fast, and is very forgiving. It was the only product suitable for the environment I faced.