Steve has been posting pictures of his clip wing project on the Facebook Monocoupe Group. I will cross post here also:
More Clipwing photos. The last of the wing parts are finished. The aileron horns were cut down to remove the upper cable eyelet since the horn will be actuated with a torque tube. All the lift strut hardware has been purchased and will be used when the wing is mounted on the fuselage to check length of the struts. To top off the wing I fabricated a new pitot tube. The tip is machined from brass stock and drilled for the pressure and static ports with copper tubing soldered in.
No comments:
Post a Comment